Automatic Door operator (opener & closer) for Inward or Outward opening doorsNeed advice?
Powered Opening with Spring Closing
Low Energy Automatic Door Mode (enables low-speed and low-energy opening and closing)
Push and Go Mode (a gentle push for automatic opening)
An Easy to install, configure and manage Automatic Door Opener
Activated by a JWS Touch Sensor, Push Pad, Push & Go or Activation Sensor
Includes Mandatory Signs: Automatic Door & Keep Clear
Designed specifically for customers that require a Free Door* and also can be used in conjunction with Push Pads, Activation Sensors, Remote KeyFob etc,
Visit the Digiway Resource Centre
Before you purchase an Automatic Door Operator, Download this Guide
Call us on 01761 414700** PLEASE READ BEFORE PURCHASING
1. The DWSR102U
which is a Power To Open / Spring Closing door opener is designed specifically for customers that require a Free Door * and also can be used in conjunction with Push Pads, Activation Sensors, Remote KeyFobs etc.* A Free Door requires no power to open or close and can be used without Push Pads, Activation Sensors, Remote KeyFobs etc.Full installation manuals can be downloaded from this website please read and understand both products to assess which product is better suited for your application.
2. The door must have no resistance while opening/closing and all such devices should be removed these include door closers, spring assistance, draft excluders, weathers strips etc. not doing so will damage the equipment and invalidate the Products Warranty.
3. Consideration must be given if fitting a locking device to ensure enough room is available after the automation is fitted.
4. JWS always recommend fitting Safety Sensors and a Fingerguard to Automatic Doors it is the installers responsibility to ensure the equipment is installed, commissioned and maintained to EN16005 Standards.
5. Always undertake a full site Risk Assessment before purchasing Automatic Door Equipment, and consult with a Fire Safety Officer where necessary.Need advice?
Call us on 01761 414700
Safety is essential to protect persons from physical harm if they approach Automatic Doors. JWS can advise you on the requirements to comply with EN16005 (the standard for Automatic Door safety) but the installer and purchaser is responsible for conducting a Risk Assessment and that the equipment is installed and maintained to these standards.
Please call us for a free, no obligation chat and download the EN16005 Summary Guide HERE