Automatic Door Opener kit EN16005-KIT DWPS102U Access Control & Automatic Door Equipment

Information
Specification & Downloads
FAQs
Returns and Refunds
Why buy from JWS ?

Full Automatic Door Opener Kit (requires switches) which includes DIGIWAY PLUS Power Swing Door Opener. Ideal for domestic, office, low traffic, toilets etc. - Not for high traffic / free doors * contact JWS if you need help/clarification. This automatic door opener is predominantly for doors that are for disabled access/use only and used in conjunction with a push button or activation sensor.

* A free door requires no power to open or close and can be used without Push Pads, Activation Sensors, Remote KeyFobs etc.

Whats in the kit?

1 x	DWPS102U	Digiway Power Swing door opener with universal arm for an inward or outward opening door
1 x	SS51	692 mm Monitored Safety sensor
1 x	JWSFG	Finger guard to prevent crushed fingers in door hinges
1 x	SIGN-003	Self-adhesive Keep clear sign
1 x	SIGN-005	Self-adhesive Power Assisted Door / Push Button To Open sign

** THIS KIT CONTAINS THE DWPS102U (Power To Open / Power To Close) Door Opener**
PLEASE READ THE FOLLOWING BEFORE PURCHASING:

The DWPS102U is a Power To Open / Power To Close door opener and must be used in conjunction with Push Pads, Activation Sensors, Remote KeyFobs etc. Although the DWPS102U does have a "Push & Go" Feature it cannot be used as a Free Door *.

The DWSR102U which is a Power To Open / Spring Closing door opener is designed specifically for customers that require a Free Door * and also can be used in conjunction with Push Pads, Activation Sensors, Remote KeyFobs etc.

* A Free Door requires no power to open or close and can be used without Push Pads, Activation Sensors, Remote KeyFobs etc.

Full installation manuals can be downloaded from this website please read and understand both products to assess which product is better suited for your application.

2. The door must have no resistance while opening/closing and all such devices should be removed these include door closers, spring assistance, draft excluders, weathers strips etc. not doing so will damage the equipment and invalidate the Products Warranty.

3. Consideration must be given if fitting a locking device to ensure enough room is available after the automation is fitted.

4. JWS always recommend fitting a Safety Sensor and a Fingerguard to Automatic Doors it is the installers responsibility to ensure the equipment is installed, commissioned and maintained to EN16005 Standards.

5. Always undertake a full site Risk Assessment before purchasing Automatic Door Equipment, and consult with a Fire Safety Officer where necessary.

Resources

Digiway Technical Installation Manual (PDF)

The Digiway operator has a very comprehensive installation manual which we strongly advise you read before purchase.

Need advice? Call us on 01761 414700

Safety is essential to protect persons from physical harm if they approach Automatic Doors. JWS can advise you on the requirements to comply with EN16005 (the standard for Automatic Door safety) but the installer and purchaser is responsible for conducting a Risk Assessment and that the equipment is installed and maintained to these standards.

Please call us for a free, no obligation chat and download the EN16005 Summary Guide HERE

Purchasing Automatic Door Equipment from JWS is done so on the understanding that you or your installer is suitably qualified to specify, install and maintain automatic doors.

JWS always recommend fitting a finger guard and the correct safety sensor.

DWPS102U Manual

< Click me to view (PDF)

DWPS102U Data Sheet

< Click me to view (PDF)

DWPS102U Measurements for fitting

< Click me to view (PDF)

DWPS102U Suitability

< Click me to view (PDF)

DWPS102U Risk Assement

< Click me to view (PDF)

Free Sales Advice and Technical Support
For Help with your purchase and installation advice please call us on 01761 414700 or email sales@jwsltd.co.uk

JWS offer time-limited installation support and cannot "train" engineers over the phone so please take advantage of the JWS pre-sales support and documentation we can provide.

Please employ someone who knows exactly what they are doing, and by this, we mean an Automatic Door Engineer, Installer, Company, or an Access Control / Door Entry company who have proven experience. Do not employ contractors without proven experience, it is possible that a cheap and poor installation will result in damaged equipment and ultimately cost you more money, in the long run, Do not: Install any cabling before you have chosen a system unless you are upgrading an existing system then please let us know first of all. Certain access control equipment will require specific cable requirements. Eg. CDVI audio and video entry systems Do not: Install any new equipment on existing cabling until you can be 100% certain that the cabling is perfect. Many customers have found an old system not working, then order a new system to be installed on existing cabling only to find out that the cabling is at fault Please check existing cabling for all short circuits and partial grounding first of all Please download the drawings and manuals we provide within the 'Specification & Downloads' section for each system and if in any doubt, just email us or call JWS for help

Installation ?
JWS can offer an installation service nationwide ( via Approved Third Parties that we have dealt with in some cases for in excess of twenty years). We do not undertake the installations directly, however, should you require any of our items to be installed by an experienced company then please drop us an email to sales@jwsltd.co.uk or call 017161 414 700 Please include the postcode area and photographs if possible. We will then pass your details on to a JWS approved company who will contact you directly.If you are trying to install such equipment yourself, there is a 'Specification & Downloads' section where all manuals and drawings can be accessed

Payment?
You can order directly online and pay by Credit/Debit card or simply call our Sales Team to place orders over the phone on 01761 414700, alternatively you can pay by Bank Transfer, please email us at accounts@jwsltd.co.uk should you wish us to raise a Proforma Invoice for this method of payment.

What about Guarantees /Warranties?
All products supplied are fully covered by the manufacturer's guarantee for a minimum of 12 months.

When will my goods be delivered?
UK mainland:
Option 1. Free 5 Day - UK Delivery on Orders over £100 net
Option 2. Three Working days via Hermes £6.95
Option 3. Next Working Day * from £12
*1 Hour Delivery Window and DPD free text and email tracking included
Choose from Next Working Day, pre 10:30, pre 12, afternoon or a Saturday or Sunday
Orders must be placed by 1.30pm Monday-Friday on Items showing in stock
All prices subject to VAT(Excluding Bank Holidays), we cannot be liable for any loss caused to you by late delivery.

My product was received damaged or incomplete?
Please report any transport damages within seven days of receipt. Please note that we cannot help with any damage claims reported after seven days of receiving delivery. Please contact our Customer Services on 01761 414700 and refer to the terms and conditions of sale.

What do I do should I have a complaint?
Should you in any way feel dissatisfied with any part of our service then please contact us. Should you still feel that your grievance has not been properly addressed then you may of course continue correspondence with the manager. In the event that no amicable agreement can be reached then an independent ombudsman may be sought to settle the matter.

Wrong item received?
In the unfortunate event of receiving an item other than originally ordered, contact the Customer Services within seven days of receipt 01761 414700

Can I purchase items not shown on the site?
JWS carry a comprehensive range of products in stock, we only feature a carefully selected range on the site. ( for example some "Trade Only" products are not shown) For any models not listed, please contact us and we will be happy to help. We can also specifically order models for you that we do not normally carry in stock.

In the unlikely event that you need to return an item, please contact our team on 01761 414700 within 14 days of accepting delivery of the item.

Restocking charges apply. We will discuss this with you upon receipt of the cancellation request. Restocking charges will be applied where the products are no longer required AND NOT for goods returned because either defective or damaged. We usually charge 20% of value.

Items that are returned to JWS unboxed and returned in "as new" saleable condition will qualify for restocking. We will not refund items that have been un-boxed or installed.

Please note that we cannot accept returns on special orders. Special orders may consist of items sent via third party shipping companies or made to measure products. If you are unsure on whether or not your item is a special order, please contact us on 01761 414700 prior to placing the order.

JWS are an Electronics Design & Manufacturing business specialising in Access Control & Automatics Doors not simply an Internet-Based discounter.

While you may find cheaper prices elsewhere we are confident our Sales & Technical Support is one of the best available - after all if you are buying specialist equipment, having reliable, experienced and free support* should be at the top of your list.

This is why our our telephone number 01761 414700 and our email address sales@jwsltd.co.uk appears at the top of every page.

We also hold official CDVI and Record training certificates!

* T & C's apply - availability of support assumes the installer is an experienced and suitability qualified contractor. Should the amount of support be deemed by JWS as "beyond reasonable provision" you will be advised to employ a more suitably qualified local third party to assist and complete your installation.