Full Automatic Door Opener Kit (requires switches) including the DIGIWAY PLUS Spring Return Door Opener
Whats in the kit?
** THIS KIT CONTAINS THE DWSR102U (Power To Open / Spring Close) Door Opener**
|1 ||DWSR102U ||Digiway Spring Return door opener with universal arm for an inward or outward opening door |
|1 ||SS51 ||692 mm Monitored Safety sensor |
|1 ||LAS9070 ||Finger guard to prevent crushed fingers in door hinges |
|1 ||SIGN-003 ||Self adhesive Keep clear sign |
|1 ||SIGN-005 ||Self adhesive Automatic door sign |
PLEASE READ THE FOLLOWING BEFORE PURCHASING:
which is a Power To Open / Spring Closing door opener, is designed specifically for customers that require a Free Door * and also can be used in conjunction with Push Pads, Activation Sensors, Remote KeyFobs etc.* A Free Door requires no power to open or close and can be used without Push Pads, Activation Sensors, Remote KeyFobs etc.Full installation manuals can be downloaded from this website please read and understand both products to assess which product is better suited for your application.
2. The door must have no resistance while opening / closing and all such devices should be removed these include door closers, spring assistance, draft excluders, weathers strips etc. not doing so will damage the equipment and invalidate the Products Warranty.
3. Consideration must be given if fitting a locking device to ensure enough room is available after the automation is fitted.
4. JWS always recommend fitting a Safety Sensor and a Fingerguard to Automatic Doors it is the installers responsibility to ensure the equipment is installed, commissioned and maintained to EN16005 Standards.
5. Always undertake a full site Risk Assessment before purchasing Automatic Door Equipment, and consult with a Fire Safety Officer where necessary.Resources Digiway Technical Installation Manual (PDF)
The Digiway operator has a very comprehensive installation manual which we strongly advise you read before purchase.
Need advice ? Call us on 01761 414700
Safety is essential to protect persons from physical harm if they approach Automatic Doors. JWS can advise you on the requirements to comply with EN16005 (the standard for Automatic Door safety) but the installer and purchaser is responsible for conducting a Risk Assessment and that the equipment is installed and maintained to these standards.
Please call us for a free, no obligation chat and download the EN16005 Summary Guide HERE
Purchasing Automatic Door Equipment from JWS is done so on the understanding that you or your installer is suitably qualified to specify, install and maintain automatic doors.
JWS always recommend fitting a fingerguard and the correct safety sensor.